FLUID POWER SYMBOL
TUCSON
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Umbergaon, Gujarat
C1B 246/5, G.I.D.C. Indl. Estate
tucson@vsnl.com
3D ISOMETRIC VIEW
12
RELIEF VALVEDGMC3
Specifications
Figures based on: Oil Temp = 40°C Viscosity = 40 cSt
Max Flow 40 lpm
Max Pressure 350 bar
Cartridge Material
Working parts : Hardened, ground steel
External surfaces : Zinc plated
Weight
DGMC3 PT: 1,20 kgs
DGMC3 AT BT: 1,25 kgs
DGMC3 AB BA: 1,16 kgs
Manifold Material SG Iron
Mounting CETOP3
Seal Kit Number SKDGMC3 (Nitrile) SKDGMC3V (Viton
®
)
Filtration Level BS5540/4 Class 18/13 (25µ nominal)
Operating Temp -20°C to +90°C (Standard Seals)
Leakage Less than 0.3 millilitres/min (5 dpm)
Viscosity Range 5 to 500 cSt
Application
The modular or sandwich valve is
stacked along with directional valves
in CETOP 3 interfaces to provide a
check valve system in various ports
depending on the configuration. The
valve can be used to either prevent
pressure spikes in the main pressure
port ‘P’ or the actuator ports ‘A’ and ‘B’.
Operation
As with all direct acting relief valves,
when the pressure at P or A and/or B
exceeds the spring force, the poppet
shifts backward opening the radial
holes and allowing the to the Tank
Port. The pressure can be set by
adjusting the tension in the spring.
Features
Sandwich construction offers a
compact solution. Hardened working
parts ensure a long, reliable and
trouble-
construction gives flexibility in
servicing..
12-310.A
DGMC3 PT
DGMC3 AT BT
DGMC3 AB BA
TP A B